Case Studies: Our Lifting Equipment in Action in Scotland and Beyond

We at Atlas Winch & Hoist Services have a well-established reputation for matching the best, optimal selection of quality lifting equipment to suit your project’s particular needs. Serving the whole of the U.K. and beyond, we cater to projects of any size or scale, and are sure to have a range of lifting, hoisting, pulling and winch equipment you can rely on. Be it utilities, construction, oil gas, renewables or engineering, our capable and seasoned team will take into account the minutiae of your project and link you to the equipment your environment and application requires.

Below is a selection of use cases regarding projects Atlas Winch & Hoist Services have supplied with equipment and lent our lifting and pulling equipment expertise to.

6 POINT MOORING SYSTEM ON ATLANTIC CARRIER VESSEL

Atlas Winch & Hoist Services Ltd was contracted by Atlantic Marine & Aviation to
supply and commission a full 6 Point Mooring System on their vessel the ‘Atlantic
Carrier’.

Atlas’s supplied all the Winches, Hydraulic Power Units, Deck Sheaves, Swivelhead
Fairleads, Running Line Monitors & Bridge Control complete with CCTV monitoring
on each winch.

Atlas’s experienced engineers also commissioned the winches and controls once
installed on the vessel, this included plumbing of hydraulics, Cabling & Wiring of
Controls, RLMs & CCTV System. The engineers then carried out a full function test
of the system as well as attending a full sea trail of the operation of the system.
Please contact Atlas if you have a requirement for a Mooring System with on your
barge or vessel.

Equipment Supplied

  • 6 x 35Tonne Hydraulic Drum Winches
  • 3 x Twin Pumped Diesel HPU
  • 6 x 600m x 36mm dia Wire Rope
  • 4 x Horizontal Deck Sheaves
  • 6 x Swivelhead Fairleads
  • 6 x Running Line Monitors
  • 1 x Central Bridge Control c/w CCTV

SHORE BASED CABLE PULL IN - DENMARK

Atlas Winch & Hoist Services Ltd was contracted by Maritech to supply cable pulling
equipment for the Cobra Interconnector HV Project in Endrup, Denmark.
Atlas’s equipment was used onshore to pull a 1,500m long subsea power cable
ashore from the pipe laying barge. The winch was positioned approximately 150m
from the shoreline and a large excavator was used to secure the winch in position.
The 15Tonne Tensioner was used on the barge to help deploy the cable.
Atlas supplied an experienced winch operator along with the equipment. The
operator controlled the speed of the winch and used the Load Monitoring System
to monitor the line pull on the cable throughout the pull.

Equipment Supplied

  • 1 x 30Tonne Hydraulic Drum Winch
  • 1 x DHP230 Diesel HPU
  • 1 x 15Tonne Twin Tracked Tensioner
  • 1 x 10Tonne Universal Deck Capstan
  • 1 x Running Line Monitor c/w Display
  • 1 x Winch Operator/Engineer

NO MATTER HOW COMPLEX YOUR REQUIREMENTS ARE WE CAN HELP CONTACT YOUR NEAREST ATLAS:

SCOTLAND: 01899 221 577

ESSEX: 01371 859 555